Female Anatomy Reference, 1:3 Scale (Remix - See Description)

thingiverse

NOTE: I have now successfully completed printing this model and edited the files to take care of some problems. Please see the section "Post-Printing" for details. This is a Remix/modification of "Female Anatomy Reference" by Frazus. I edited the mesh slightly and cut it up into major sections to allow for larger-scale printing in multiple parts, which also makes it easier to hand-finish and paint. I initially posted this as a Remix on the original, but it didn't show up in my Things, so I'm posting it as a Thing instead of a Remix so I can find it easier. I have scaled this so it is approximately 1:3 scale and can be printed on a printer with 235x235x250 print volume, such as the Ender 3. If you want to print these at a more reasonable 1:6 scale, reduce the scale of each part by 50% in Cura. THERE ARE TWO CONFIGURATIONS OF THE ARMS AND HEAD AVAILABLE: The arms are available each as either one piece (arm_l.stl, arm_r.stl) or as three pieces each (arm_l_forearm.stl, arm_l_upperarm.stl, arm_key.stl, same naming convention for the right arm parts). Printing in three pieces significantly reduces the necessary supports. You can either print the head as one piece (head.stl) or in three pieces (head_left.stl, head_right.stl, and head_key.stl). The three-piece print allows you to print each side of the head flat on the bed, which reduces the necessary supports. The peg and slots for the three-piece print are a very tight fit with flow properly set and does not require glue, but if you DO want to glue it, put the glue in place BEFORE you key the halves together! Please see the Print Settings section for more details.