Feller Classic Modern - Swiss Light Switch Cover

thingiverse

I needed a cover for my light switches because I use smart home switches, but I couldn't find anything for the classic swiss light switches. So I designed some myself, the Cap can be removed in case you need to press the switch. ###The project contains the following files: - *bottom_full_plate.stl:* Full Backplate Cover, Replaces the Original inner Backplate from Feller. - *bottom_plate.stl:* This in an inlay for the Original inner Backplate and goes over the Original plate. - *cover_blank.stl:* Is the Cap. - *cover_stop.stl:* Is the same cap but with an 1mm deep Forbidden-Sign design at the top. (I have not printed this yet) - *stop_inlay.stl:* This is the negative of the Cap inlay, you can print this in a different Color and glue in to top. (I have not printed this yet) ###Assembly: ⚠️⚠️***Warning: You are working on mains voltage! 230V is not a toy, make sure the fuse is switched off before installation, if you are not sure, have the installation done by a professional!***⚠️⚠️ - **SWITCH OFF THE FUSE** - Remove the two screws from the light switch. - If you want to use the full backplate, remove the inner backplate and insert the new one, tightening it like the old backplate with the original screws. - If you want to use the inlay backplate, insert the inlay into the inner backplate and use the original screws to tighten everything down. - Switch on the Fuse. Hopefully it can help others.