FEDOG Horn Clip-On

thingiverse

### Clip-On mount for Fedog Horn. Best way to mount the horn if you don't have handle bars. (EUC / OW / E-SKATE) #### Assembly instructions * Disassemble the horn and all the components. * Cut the trigger button cable close to the PCB side. * Remove the clip and rubber attachment from trigger button * Shorten the trigger button cable * 15 to 20 CM should be enough to spare * Drill a new hole for the cable next to the mounting holes * Make sure you drill close to the top of the case * I drilled too close to the center of the case and had to enlarge the hole. * But the horn back together and resolder the trigger button cable. * Be carefully when you drive the longer screws, if they are too large it could destroy the PCB * add some silicone to the new and existing cable holes to make the case more water resistant #### Fedog Horn https://www.amazon.ca/Waterproof-Controller-Anti-Theft-Vibration-Rechargeable/dp/B09BZ5TH23 https://www.aliexpress.com/item/32980840218.html #### Additional hardware * 2 M3x20 screws * 1 Snap Hook / Carabiner