FCB Barcelona (5 color)
thingiverse
Start printing at 1.08 mm with the printer set to black ink. The print settings are as follows: Print in blue from 1.23 mm to 1.83 mm. Switch to white and print from 1.98 mm to 2.43 mm. Change to red and print from 2.58 mm to 3.03 mm. Finally, switch to yellow and continue printing until the end at 3.60 mm. Printer Settings: The printer being used is a DIY Prusa i3 model. Print Options: Rafts: Printing without rafts. Supports: No supports will be used during this print job. Resolution: The print resolution has been set to 0.15 mm for optimal results. Infill: The infill percentage has been set to 33% for a balanced print quality. Notes: A note from the printer operator: ABS filament is being used with a nozzle diameter of 0.4 mm.
With this file you will be able to print FCB Barcelona (5 color) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FCB Barcelona (5 color).