Fatshark headband and power supply mod

thingiverse

I don't like side-mounted batteries on small goggles, that's why I designed a little hook for a 3-strap headband and a compact power supply box with a power switch. The parts used: - Eachine VR006 headband https://www.banggood.com/Eachine-VR006-Elastic-Head-Band-For-FPV-Goggles-p-1185224.html - A 2S balance plug, cut from a defective 2S battery - A 5.5x2.1mm 90-degree DC plug, with the JST removed https://www.banggood.com/JST-to-DC-Adapter-for-Fatshark-Battery-p-1128902.html - A 2.6V-30V mini digital voltmeter https://www.banggood.com/3Pcs-Yellow-LED-0_28-Inch-2_6V-30V-Mini-Digital-Voltmeter-Voltage-Tester-Meter-p-980046.html - A 7x7mm switch, with six pins, allowing it to switch ground and voltage too https://www.aliexpress.com/item/20PCS-Lot-7X7mm-7-7mm-6Pin-Push-Tactile-Power-Micro-Switch-Self-lock-On-Off-button/32724808757.html - An Eachine 2200mAh battery for the VR-D2 https://www.banggood.com/Eachine-VR-D2-FPV-Goggles-Spare-Part-7_4V-2200mAh-Lipo-Battery-p-1086637.html - A 5.5X2.1mm female adapter https://www.banggood.com/0_4M-5_5X2_1mm-Female-Adapters-DC-Power-Extension-Connector-Cable-p-965315.html - Two simple hair clips to hold the power box on the head strap https://www.banggood.com/50pcs-Metal-Black-Waved-Hair-Clips-Salon-Pins-Grips-Hairpins-Barrette-p-80398.html The strap hook should be slightly bent to match the curve of the faceplate. Two-sided tape is used to stick it to the faceplate, then velcro is applied on top. The tape holds the strap hook firmly in place.