Fancy Oscillating Fan - Fully Printed

thingiverse

Update 1/5/2021: Flipped motor and moved gear to front shaft section, attached rigidly against the front bearing. Motor noise has been reduced significantly. Switched out 20mm M3 screws to 15mm. An oscillating desk fan, designed in Fusion 360. Everything is printed except for fasteners and electrical components. Optionally contains a rechargeable battery for completely portable operation. Fusion 360 link: https://a360.co/3qBHxLy Video: https://youtu.be/vgS1dX1ZaXw Base materials: |Item|Quantity|Notes| |--|--|--| |M3x10mm bolt, button head| 19|| |M3x15mm bolt, button head|4|| |M3 lock nut|17|| |130 size hobby motor|1| Currently using an 11.5k rpm@6v motor. Try to get one with stronger magnets for higher torque.| |SPST Toggle switch, M6 thread|1|| |608 bearing|2|| |22awg or similar wires, heatshrink, etc.|Varies|| Rechargeable option: For this option, print the regular bottom plate, as well as the base midplate. Do not print the non-rechargeable version of the bottom plate. The battery will sit under the midplate, with the charging electronics attached to the top with hot glue or double sided tape. |Item|Quantity|Notes| |--|--|--| |TP4056 battery charging board + protection circuit|1|| |LiPo battery, 306062 1800mah|1| 1-cell batteries up to 3mmx62mmx62mm should work| Non-rechargeable option: For this option, print the non-rechargeable bottom plate, and do not print the base midplate. |Item|Quantity|Notes| |--|--|--| |5v USB breakout|1||