Fancy Clock

prusaprinters

It's a clock! The face is 280mm in diameter. The hands are designed for a Quartz clock mechanism. You may need to scale these up or down slightly for a snug pressure fit - depending on the accuracy of your printer. You can, of course, just print the clock face and use the hands that came with the motor - if that's your preference. I opted to use the thin metal second hand that came with my mechanism. I've included an optional hanging bracket and a spacer for the clock mechanism but depending on the one you have you may not need these parts. Clock Mechanism: https://www.amazon.com/dp/B0722MV73W/ref=sspa_dk_detail_6?psc=1 Clock Face: • Print Face down • 3mm layer height • 4 bottom layers • 5% Infill Clock Hands: • Print Face Down • 1.4mm layer height • Solid Infill Bracket: • Prints with supports • 3mm layer height • 5% Infill Spacer: • 3mm layer height • 5% Infill Category: 3D Printing