Fancier BLtouch bracket for Biqu H2 extruder with 5015 fan

thingiverse

Please read this entire document before printing. Fancier looking BLtouch bracket that does not block airflow for the 5015 part cooling fan and mounts at the correct height instead of 1mm too high like the bracket this is remixed from. Tools you may need: reamer or 4mm drill bit for bracket mounting hole, M3 tap or sharpened M3 bolt to cut threads for the BLtouch itself, 3mm drill for through-hole mounting, or 3.25mm drill and M4 tap for M4 mounting(not recommended) Hardware needed: (2) M4 x 20mm cap head bolt, (2) M3 x 8mm bolt, (preferably countersunk to self-center the BLtouch itself since it uses oddly sized holes for mounting). Alternatively you can use cap head bolts and washers. The holes for the BLtouch mounting are slightly undersized and designed to be tapped with an M3 tap or hardware directly threaded into the plastic. According to my CAD drawing of the entire assembly, the BLtouch probe centerline is 47.767mm away from the centerline of the nozzle in the Y direction, and 0mm in the X direction (when the 1.5mm spacer to mount the probe with the connector inboard), and is 46.267mm in the Y direction when mounted without the spacer and the connector outboard. As this mounting is reliant on the thickness of the 5015 blower fan, your offset may not be exactly the same as per drawing. Please verify this distance prior to updating the probe location in your printer's firmware. As I don't have any of the parts for this yet to test fitment, this is marked as a work in progress. Print at your own risk. If you do print it, post a make, provide fitment feedback, maybe even give me a tip!