Fan Mount Tevo Tarantula Pro

prusaprinters

I recently installed drivers Tmc2208 in my Tevo Tarantula Pro as they are hotter than the factory drivers, I need more airflow to cool them As a solution, model this base that adapts perfectly to the internal dimensions of the case. Necessary materials: 2 x 4010 Fans at 24v or 12v 12 x M3 X 20MM Screws 12 x M3 nuts 2 x M3 x 8mm screws For the installation, you must follow the following steps: 1.- Remove the electronics box from the printer body 2.- remove the lower cover 3.- Remove the side fan 4.- Weld the power cables in parallel if they are 24 v, in case of using 12 v fans they must be welded in series 5.- Fix the fans in the corresponding windows using the m3 screws and nuts 6.- install the previously printed base with the fans mounted 5.- connect the cables of the fans to the outputs of the switched source of the printer that are not used Print Settings Printer Brand: TEVO Printer: TarantulaRafts: No Supports: NoResolution: 200 Infill: 20 Filament: Aditiva Manufactura Queretana PLA BLACK Category: 3D Printer Parts