Fan mount / guide for LSI SAS 9206-16e

thingiverse

This is a dual 4010 blower / guide fan mount for LSI SAS 9206-16e, because it's temperature is really high, all the time. You will need two [40x10mm blower fan](https://www.amazon.com/gp/product/B07RSV5LTH?ie=UTF8&th=1&linkCode=sl1&tag=zhangxingeng-20&linkId=a9e4f89aced991a8cf1cb4e2699e9e06&language=en_US&ref_=as_li_ss_tl) for each card, and some M2 screws ( I personally just use some LED legs to tie it up because I don't have M2 screws/Laptop screws) This mount / guide will side in from the back, and the button at the back will hook into an empty screw hole on the LSI board. Support is needed, but easy to remove. I personally used [eSun Transparent PLA](https://www.amazon.com/gp/product/B07RSV5LTH?ie=UTF8&th=1&linkCode=sl1&tag=zhangxingeng-20&linkId=a9e4f89aced991a8cf1cb4e2699e9e06&language=en_US&ref_=as_li_ss_tl) to print with 100% infill to ensure stiffness, because the wall is relatively thin (2mm) It is sturdy enough though, you can print with 20% and I dont think it would be a problem (Not tested). Printer I used is [Sovol SV03](https://www.amazon.com/gp/product/B07RSV5LTH?ie=UTF8&th=1&linkCode=sl1&tag=zhangxingeng-20&linkId=a9e4f89aced991a8cf1cb4e2699e9e06&language=en_US&ref_=as_li_ss_tl), which is basically a copy of ender 3 but bigger printing volume and direct drive and all the good stuff. The driver board is made by creality so I would say its good. Anyways happy printing! And consider support: [Patreon](https://www.patreon.com/zhangxingeng)