False Knuckle Bottle Opener

prusaprinters

<p>The model was designed for bottle openers, is the second version of my design.&nbsp;</p><p>(This description was written while the first print of the new version was printing so the information could possibly be innaccurate)&nbsp;</p><p>I decided to make it thicker, as well as increase the infill amount to 30% instead of 20%. The first layer does not have a skirt and is 0.2mm, then every other layer is 0.15mm. Initial nozzle temp is at 216 degrees, bed temp 60 degrees, and speed is 96. If I am correct, this saved version is at a constant 216 degrees, 60 degrees, and I do not remeber the speed.&nbsp;</p><p>I do not have any print files because I wanted to allow some adjustments for creators in case they wanted to change filament types, speeds, temps, etc.&nbsp;</p><p>Not sure if it is possible, but if you have any questions feel free to contact me via comments or messaging through prinatbles.</p><p>Also, feel free to ask for more photos of the final print.</p>