Fallout 4 Automatic laser rifle.

myminifactory

Hey all! I recently completed a fully functional automatic laser rifle build using an Arduino and sound board. Here are the STL files, along with a Netfabb file showing the location of all parts/assembly. In short, this isn't perfect, but you should be able to build it with a removable stock. Please refer to the screenshots for screw and bolt alignment. Print the spine and handle solid, then acetone weld them together; print everything else with the largest honeycomb infill, best with 3 shell layers. FYI, part tolerances are not good. Slice and print the spine parts (offset for strength), then acetone weld them together. Print the handle and stock, then acetone weld them together. Print the rear barrel cap and rear connector; push the connector part of the way inside the barrel cap and acetone weld them together. Print x13 wire clip 2 and x2 wire clip 1. *Edit: Issue fixed with Stock cover final.stl. Download from here: https://www.dropbox.com/s/rt19nr79p8aruq3/stock%20cover%20final%20(repaired)%20stl?dl=0