Falcon F16v3 with Expansion dual-mount

thingiverse

This was created to mount the Falcon F16v3 and the Expansion board together in a one-piece to make a cleaner build. The objective behind this model was to have the pigtail connectors the closest possible to limit the length difference coming out of the enclosure. I was not satisfied with all the current ways people have been mounting these two cards. The standoff is exactly 1 inch or 25.4mm so you can use or make your own with whatever you have available, or print the included part. From base to highest point of the card is 63mm or just under 2.5 inches. Hardware required: 4 x 8-12mm M3 bolts, 2 x 35-40mm M3 bolts Printed at 30% infill and once bolted, it is very strong with no flex at all. Enjoy!