Fairphone 2 cover with integrated card holder

thingiverse

Printing info: Adhesion ensured with Brim. Printed in upright position using Cura 4.0 slicer settings, nozzle temperature set at 240 degrees Celsius and bed temperature at 40 degrees Celsius. Support is required for the top part of the cardholder due to overhangs. Support blocking can be applied inside the bottom part of the phone cover. Printed with 1.75 mm transparent PETG filament from 123-d.nl. Fairphone 2 cover mesh design inspired by https://www.thingiverse.com/unwohlpol and cardholder design from https://www.thingiverse.com/oldfrog. The cardholder can hold up to 5 cards and a banknote. Changes to the cover: The top was stretched by 1 mm and the bottom by 2 mm for a perfect fit. Changes to the cardholder: The print on the top of the cover has been removed, allowing for personal decoration. The bottom housing has been resized and placed on the back of the bottom part of the Fairphone cover. The top left corner has been removed, enabling the top cover to slide onto the phone. 16-5-2019: Updated the bottom STL file due to a version problem.