Facial Mask 1.2
cults3d
#3DvsCOVID19 It's only an update of the version 1.1 This mask is made of 2 parts: 1- outer side is best printed with TPU and without support generated by your slicer. After printing you only need to trim the model existing support with a scissor. Although I don’t recommend it, if you print the outer side with hard plastics, then use the file without support and add the support with your slicer software. It will fit in very few people, because of the nose form. Additionally it can scratch the skin, because face skin is very sensible. In general I don’t recommend any hard plastic in contact with the face!!! 2- inner side can be printed with any rigid plastic (PLA, ABS, PETG) or harder TPU’s without any support. Between both parts you need to add some thin part to function as a filter (cotton fabric for example)
With this file you will be able to print Facial Mask 1.2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Facial Mask 1.2.