Face to the Mat Paraphernalia

prusaprinters

Print a sleeve-face and sleeve-back for each wrestler in your federation. You may want to use different colors for your wrestlers. For example: Heels can be blackFaces can be whiteChampions can be goldTag team partners can be in the same colorPrint the sleeve-face model face up on the print bed. No supports are necessary. I print at 0.3 mm resolution on a 4mm nozzle with PLA with 20% infill, but other parameters and filaments should work too.Print the sleeve-back vertically with the bottom of the sleeve on the print bed. You may want to print with a brim. No supports are necessary. I print at 0.3 mm resolution on a 4mm nozzle with PLA with 20% infill, but other parameters and filaments should work too.Two sizes of storage tray are provided along with the divider. You may want multiple dividers per tray, but only one is necessary. I have provided a very basic lid for the trays, but personally, I don’t use a lid.