Face shield V15

thingiverse

##Update 24-05-2020: A small change has been made to the face shield design. The lip where the sheet falls under is moved slightly outward. We received feedback that this lip sometimes got stuck to the frame and needed to be cut loose with a knife. Also, the two pins on the side are made longer to accommodate the sheet and decoration options. This version is now V15. ##Update 27-04-2020: Version 13-1 has been added. This version features small discs on each leg to improve bed adhesion. The most recent design is always shown, along with what's changed compared to the previous design. You'll always be up-to-date. ####The most recent version is V15 together with V14. V14 is an open version, V15 is a closed version, Both can be used. Print-time: 45-60 minutes Scroll down for print settings! ####What's new? This version is closed from the top (we got some feedback). The eyes are now more protected. To prevent fogging of the screen, a slit has been added on either side, this was already with V11. At the sides the legs have an increased thickness to make the frame more robust. Beware: you may have to adjust your skirt and rotate the model, to be able to fit 2 face-shields on your printbed, depending on its size. Also, there are files added to be able to fit 2 frames on the bed for several bedsizes. The Sheet has also been updated to V15. ####Design The design consists of two parts: a headband/frame and an exchangeable screen. ####- Headband: See Thing Files ####- Screen: We have created the headband-design in such a way that you can use standard A4 clear sheets (Overhead Projector film or other 100 to 300 microns thick) and a standard 4-hole punch. You can also use a 2-hole punch with the 8:8:8 setting. ####For all makers: For way of working, hygiene protocol, and 3D-print tips, look at the link below: https://www.makers4all.org