Face Shield - Fast printing in vase mode

thingiverse

This face shield prints extremely fast in vase mode, consuming only 11 grams of filament for the thin version and 17 grams for the normal one. To print this design, I use Cura 4.5 with the following settings: Printer Nozzle: 0.4 Line Height: 0.3 Line Width: 0.8 Wall Line Count: 1 Top/Bottom Layers: 0 Material: PLA SAKATA 3D 850 Print Temperature: 240°C Initial Print Temperature: 230°C Final Print Temperature: 240°C Print Speed: 60 mm/s Wall Speed: 60 mm/s Outer Wall Speed: 60 mm/s Inner Wall Speed: 60 mm/s In my experience, the normal version takes approximately 19 minutes to print, while the thin version finishes in about 12 minutes. The holes on the A4 plastic protection cover are evenly spaced at 80mm apart, with four standard holes. When using a hole puncher, I select position 888. Note: If "download all" fails, you can find the STL file by going to Thing Files and downloading it manually. I discovered this design on MyMiniFactory (https://www.myminifactory.com/object/3d-print-116701) and made some modifications to adapt it for use with a standard A4 sheet, featuring four evenly spaced holes measuring 80x80x80mm.