Face-plates for Minimalist Wallet

thingiverse

EDIT** : As pointed out by a smart person in the comments, I had forgot to add the mirrored parts for the plates that have text on them because you cant just mirror them in your slicer, so I have added them now. My excuses for not noticing this more early. The files are added with the name: ".... MIRRORED". Have a nice printing time! I have made some face-plates for the "Minimalist Wallet by linfredriksson" and also added the inside part for an elastic band on the side of the wallet. I remixed the face plate just a bit so that the face plate is 0.3mm thicker to have the countersunk screws not stick out above the face plate as could happen with the original disign because the tolerance was a bit tight. The inside parts are also slightly modified to have some space for the elastic bands where they are sewn together (or glued) and to fit a 25mm wide elastic band which looks a bit better and is the same size as some other well known hardcase wallet that we all know from their sponsorships with YouTubers ;) There is also an inside part that fits a side elastic band just as can be found on the above mentioned hardcase wallet we all know. Sideband is secured with superglue and is squeezed tight under the faceplate Protip: You can also just glue the elastic band together with superglue which is more easy then using needle and thread and works perfectly fine without letting go even after heavy pulling on the parts :) 1 wallet = 2 Face plates (use 1 mirrored+1 other if it has text, don't mirror text in slicer) 2 Inside parts (A and B / with or without sideband) +-20cm elastic band / 2,5cm wide 16pcs / M3x5mm countersunk screws (I used m3x5mm ISO 10642 A2) Please download the files serparatly because the site is giving problems when downloading all files at once. Any questions or suggestions are allways welcome. If you would have a request for a name, logo or anything else, just let me know and I will see what I can do for you :) Have a nice printing time!