F450 type quadcopter top with APM Dampener Mount and taller arms

prusaprinters

<p>I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength.</p> <p>There is also a file for the arms that are 6mm taller because I wanted to fit a large battery in the middle rather than underneath where my gimbal would go.</p> <p>Also added a file with the gps post already on the plate, and a file for the bottom plate with holes enlarged for standard gimbal attachment:)</p> <p>The apm mount that I used is located here <a href="https://www.thingiverse.com/thing:160655">http://www.thingiverse.com/thing:160655</a></p> <p>It is the Omnimac_APM_Mount_v1.5_bottom_plate file so the top plate must be the Omnimac_APM_Mount_v1.5_top_plate file</p> <p>Thank you both for these wonderful files!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Robo 3D</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>R1 ABS + PLA Model</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>.2 or better</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Notes:</strong></p> <p>For dampeners use the 9mm x 13mm or earplugs :)</p> </p></p></p> Category: R/C Vehicles