F1 Suzuka Circuit Japan with elevation, to scale
prusaprinters
<p>Suzuka International Racing Course with elevation and to scale.</p><p> </p><p><strong>Printing</strong>: At <strong>190%</strong> you can fit it on an Ender 3 (V2), an Aquila or any other printer with a 220x220mm bed. I have attached a premade 3mf for Prusa Slicer (2.5.0). <strong>Make sure to print with snug supports</strong> if you don't like wasting too much filament.</p><p>At 100% scale I would recommend printing on an resin printer (SLA) or at ≤0.12 layer height very slowly. Proper support separation needs to be accounted for this scale so as to not break the print while detaching the supports.</p><p> </p><p>There are two variants, one straight out of onshape, very detailed but with some open faces and one (recommended) at 50% detail and with the open faces fixed (using Meshmixer).</p><p> </p><p><strong>Time</strong>: it took 5 hours and 21 minutes at 190% scale on my Aquila running Klipper. I used rainbow PLA from SunLu.</p><p> </p><p>The model was made from scratch in onshape using data from the Formula 1 website.</p>
With this file you will be able to print F1 Suzuka Circuit Japan with elevation, to scale with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on F1 Suzuka Circuit Japan with elevation, to scale.