F1 Quick Release Mount
thingiverse
I created a new mount for the bolt pattern of IALM's F1 wheel design to enable connection to a quick release system. Meant to be used with the quick release body found here: https://www.thingiverse.com/thing:3317013 To install, position the triangle on the QR facing upwards towards the ceiling. Works with M5 bolts and nuts. To attach to the wheel, I used the following: Flat head M5 bolts - https://www.amazon.com/gp/product/B01F96QPS0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Various metric bolt/nuts (the case they come in is poor, but the hardware is suitable for indoor applications) - https://www.amazon.com/gp/product/B07333MLQN/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 I printed the two parts with the following settings (no rafts or supports are needed if printed in correct orientation, print with large flat sides down): Base Mount: .3mm layer height, 2.0mm wall thickness (5 layers), 1.4mm top/bottom thickness (5 layers), 50% infill. QR: .2mm layer height, 2.0mm wall thickness (5 layers), 1.4mm top/bottom thickness (5 layers), 75% infill.
With this file you will be able to print F1 Quick Release Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on F1 Quick Release Mount.