F-302 from Stargate by taichl - easy multicolor printing

thingiverse

I'm remixing this superb model by @taichl to make multicolor printing easier. I used light grey for "Color-A", dark grey for "Color-B", white for "Color-C" and black for "Color-D". Note: The naming uses "Bow", "Stern", "Port" and "Starboard": https://tinyurl.com/t3kudk5f - For 'f_tail_1_1x.stl' and 'f_tail_2_1x.stl', use the slicer to insert a M600 (filament change) command so that the base is printed in Color-B, and the text is printed in Color-A. - For 'f_top_2_1x.stl', use filament change so the base is printed in Color-A, and the 4 top pieces are printed in Color-B. - Instead of the original 'f_top_1x.stl', the files attached here, the files prefixed '2color Top' replace it. Print '2color Top - Top.3mf' in Color-A and all other '2color Top' files are in Color-B. The stripes are named to know where to insert them: SPOB means < Stern - Port Outer - Bow > SPCB means < Stern - Port Center - Bow > SPIB means < Stern - Port Inner - Bow > SSIB means < Stern - Starboard Inner - Bow > SSCB means < Stern - Starboard Center - Bow > SSOB means < Stern - Starboard Outer - Bow > Note: The text on the bottom face of the models is not intended to be printed (it should be shallower enough to be ignored by the slicer), as it only serves the purpose of identifying the pieces. - Instead of the originals 'f_wing_a_1x.stl', 'f_wing_b_1x.stl', 'f_wing_c_1x.stl' and 'f_wing_d_1x.stl', the files prefixed '2color Port-Wing' and '2color Starboard-Wing' replace them. 'Bottom' and 'Top' are meant to printed in Color-A, while 'Center-Band' and 'Flaps' are meant to be printed in Color-B. - For the original 'f_missile_4x.stl' (or the remix 'SG_F-302_missile-fixed-supported_4x.stl'), use filament change so that the base is printed in Color-C, the top in Color-B and the head in Color-C. - For the original 'f_cockpit_3_1x.stl', print in Color-D. - I advise to print 'f_connection_1_3x.stl' at several different scale, so that it's easier to assemble the model. I found that less force and a bit of glue was much move convenient for me. Only change X and Y scale, not Z scale: 100%, 95%, 90% and 85%. - All the other original models can be printed as normal.