EZOut and Filament Guide for Ender 3, Pro

thingiverse

Remix of [nastyninjabear's excellent idea](https://www.thingiverse.com/thing:3416264) for combining a filament guide with an EZOut holder. This remix makes several changes to the original design: * One screw hole for the EZout was not aligned with the bracket hole. * The out end of the EZout on the bracket was about 8mm high and 2mm off from where it entered the extruder, causing a sharp bend in the filament between this part and the extruder. * Stronger supports were added to the design to prevent damage when bumped or collided with. * Necessary files for the roller parts are now included. Additional components needed: * 608 bearing * M4x16 screw (nylon or steel) * M3x12 screw (nylon or steel) * Two M3 nuts * One M4 nut Assembly Instructions: 1. Insert the 608 bearing into the ring by pressing it in place, possibly requiring some scraping away of the inside of the ring with a scissor blade. 2. Place two spacers inside the 608 bearing. 3. Use the M4x16 screw to secure the bearing within the arms. 4. Attach the EZout to the bracket using M3 screws and nuts through the two holes provided. 5. Mount the entire assembly to the X stepper bracket as shown in the pictures.