EZ Antenna Tracker / Ground Station, EZtracker Immersion RC

pinshape

NEW EzTracker V2 Now Available & Cheaper Visit http://www.blackboxrc.co.uk/category_s/128.htm for more information. http://www.ebay.co.uk/itm/ImmersionRC-EzAntenna-Tracker-V2-FPV-Plug-Play-FPV-Antenna-Tracker-Fatshark-/231757379087?hash=item35f5d0f60f:g:CVYAAOSwLzdWTFN- ImmersionRC Features RcHobbysUK Eztracker V2 Design on Their Website http://www.immersionrc.com/3d-print-zone/ Rc EZAntenna Tracker / Ground Station, EZTracker, Now Available A Quick Video Can Be Found at the Following Link: https://www.youtube.com/watch?v=924DQiPbUcY Test Flight with the Prototype at 1.3 Miles with No Break-Ups in the Video: https://www.youtube.com/watch?v=qOXegce-bcY Cloud Surfing Using the Antenna Tracker: http://youtu.be/fef9T6Dp0CA The EzTracker V2 Has Been Designed Using a 180-Degree Pan Servo and a 180-Degree Tilt Servo. Two Video / Audio Outputs Are Available. One Charge Input Is Provided Using Two Banana Plugs. An LCD Displays the Battery Percentage Left and a Low Voltage Buzzer Alerts When Necessary. Two Missile Switches Are Included, One for Power On/Off and One to Prevent Charging Damage. Rubber Feet Allow the EzTracker V2 to Sit on Top of a Car. A Tripod Mount Attachment Is Also Available. An iPad and iPhone Holder Provides Real-Time Display of Its Location. VTX Transmits Received Video from the Tracker to a Second Portable VRX, Making the Antenna Tracker Wireless. DO NOT CHANGE the Orientation of the STL Files - They Are Correct for Printing. DO NOT USE SUPPORT - Any Needed Has Been Added to the Parts. 40% Infill Is Recommended; 30-50% Would Also Be Suitable. A List of Required Parts and Detailed Build Instructions Will Be Provided After Testing. The Pan & Tilt Alloy Pins Used Were CNC Machined in House but STL Files Are Included for Printing. With a Little Sandpaper and Elbow Grease, a Tight Fit on the Bearing Should Be Achievable. 3D Printed Parts Needed Include: - 2 x Servos - 2 x RED Phono Sockets - 2 x Yellow Phono Sockets - 1 x Red Charge Socket - 1 x Black Charge Socket - 1 x Vrx & High Gain Antenna - 1 x EzTracker - 1 x Vtx & Standard Antenna / Omni - 1 x Lipo Checker LCD PCB Tools Needed Include: - M3 Tap - Helicoil Kit - Screw Driver - Allen Keys - Thread Lock - Pliers - Spanners - 2 Part Araldite - Double Sided Tape - Soldering Iron