Eye of Agamotto motor adapter

thingiverse

These parts can be added to the Eye of Agamotto model found at this link:\r\n\r\nhttps://www.thingiverse.com/thing:1929165\r\n\r\nThis model allows you to control your Eye of Agamotto with a stepper motor. The model is specifically designed for the stepper motor available on Amazon.\r\n\r\nLook for this exact model:\r\n0.9deg Thin Nema 14 Stepper Motor Bipolar 0.5A 7Ncm/10oz.in Φ36x12.5mm 4-wires\r\n\r\nThe code for it can be found at this GitHub link:\r\nhttps://github.com/tacotown/eye-of-agamotto\r\n\r\nThere are two models on the page:\r\n1) Motor adapters: These parts fit inside the model in the track where the hand crank spins. Print two and glue them on opposite sides.\r\n2) Inner eye adapter; attach this part to the motor spindle.\r\n\r\nNote: The inner eye model is very large; I scaled it down to .1% to get the printed size right.\r\n\r\nInstructions:\r\nGlue the two motor adapters to opposite sides of the track. Place the inner eye adapter on the motor spindle. Place your motor and make sure the inner eyelids work properly. When satisfied with placement, drill holes into the motor adapters and install the motor with small screws. \r\n\r\nDisclaimer: Printers and filament are different, and these pieces require precision that one model may not cover; you might need to experiment a bit.