Eye Mechanism

thingiverse

Polymaker's Animatronic Eye Device is Engineered for Desktop Extrusion Based 3D Printers. List of Non Printed Components: 2 x Servo (Futaba S3003) 1 x 2.4 GHz Transmitter 1 x Remote Control 2.4 GHz 1 x 5v DC Power Supply 6 x M2 Nut 12 x M3 Nut 6 x M4 Nut 10 x M2x10mm 4 x M3x10mm 4 x M3x12mm 4 x M3x30mm 1 x M4x25mm 1 x M4x45mm 2 x 13mmx4mm (Internal Ø 4mm) Bearing Quantity: 1 x Board.STL (35% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 1 x Pivot X.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 1 x Pivot Y.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 1 x Servo Arm Extension X.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 1 x Servo Arm Extension Y.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 2 x Ball 11.9.STL (20% Infill, 0.1mm Resolution, 2 Shells, PolyMax) 2 x Socket.STL (20% Infill, 0.1mm Resolution, 1 Shell, PolyMax) 6 x Coupling.STL (0% Infill, 0.2mm Resolution, 2 Shells, PolyFlex) 2 x Eyeball.STL (15% Infill, 0.1mm Resolution, 2 Shells, PolyMax, PolyPlus) 6 x Pin.STL (100% Infill, 0.1mm Resolution, 2 Shells, PolyMax) 4 x Conrod X.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 2 x Conrod XY.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 2 x Conrod Y.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus) 4 x Leg.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyMax) Printer Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.1mm - 0.2mm Depending on the Part Infill: 0% - 100% Depending on the Part Notes: Will Print with Any Single Extrusion FDM/FFF Printer With a Minimum Bed Size of 154mm x 125mm x 21mm Post-Printing Assembly Instructions are Located at http://www.polymaker.com/3d-printed-animatronic-eye-mechanism/ For The Tutorial, visit The 3D Printed Eye Mech, The 3D Printed Eye Mechanism Assembly Video.