extruder untuk pemasangan filament patah dengan mudah

thingiverse

Human: The extruder has an easy filament installation feature, useful when the filament breaks during printing. Procedure: 1. Pause the print. 2. Open the cover by removing all parts from the clips. 3. Pull out the PTFE (Teflon) tube, cut the filament evenly with the end of the tube, and put it back in. 4. Close the cover, insert the filament, and align it until it touches the filament inside the PTFE tube. 5. Attach the pressure nut. 6. Continue printing. 7. Use a method that suits your preferences or is easy to use. Parts: M3x6mm screw: 1pc M3x10mm screw: 1pc M3x25mm screw: 1pc M3x30mm screw: 1pc M3 nut: 1pc (for setting the arm's tightness) M4 nut: 1pc (for attaching to the PTFE/teflon 2x4 tube) Clothes hanger clips: 3pc Note: The printed results require sanding or reducing the size of the connecting rods. The results are intentionally made larger, and reduction is done until the arm can be easily installed and removed. The filament hole needs to be sanded using a 2mm drill bit. The PTFE tube hole needs to be sanded using a 4mm drill bit. Sanding is done by installing the front and rear arms first. The end of the PTFE tube needs to be enlarged (jabedron) by inserting and turning a blunt, smooth, tapered, or larger diameter object into it, aiming for the filament to enter without getting stuck in the tube's edge.