Extruder Masta - postprocess for kisslicer

thingiverse

--- New Release ---\nhttp://www.thingiverse.com/thing:710309 \n--- New Release ---\nFast bowden printing can lead to poor beads and threads.\nTo ensure a smooth build and reduce pressure in the extruder head,\nyou can use this script.\nIdeal for printing with a bowden setup,\nit allows you to gradually increase the pressure.\nas you approach the end of the working path, it will slowly release it.\nResult:\na bead or thread pattern that looks good, even at high speeds.\nThe material does not bulge or sag due to insufficient plastic flow.\nthe filament settings can be adjusted for optimal results with fast printing.\nit also allows modulating the speed of movement for the extruder head,\nonly if you want to!\nsee: https://www.youtube.com/watch?v=q1uyDekTJ7o \n141201\nyou can now add springiness value in return of ahead and tail to automatically calculate over shoot\nbased on a relationship of speed\ntry --help argument for more info.\n141129\nfix for tail subdivision. \n141124 2219\nread settings from command line args line :)\nyou can specify these values:\nex /path/to/em.py --ds=20.00 --fs=20.00 --de=25.00 --fe=20.00 --ahead=0.2 --tail=0.3 \nversion 141124_1104\none point work path fix ( thanks, Kiss ) \nadd tail option to set the amount of pressure release at end of working path.\nad new logic for reducing feed rate if unnecessary\nalso adds some basic arg parsing, like --help\n.\ \n---------------------------\nversion 141124 \ndefault command line syntax is:\nex /path/to/em.py [options] [values] file \noptions:\n--help - show this message\n--deb - enable debug mode, don't save file to disk just be verbose.\nvalue options are defined like:\n--ds=n - distance from start, default (20.0) mm\n--fs=n - feed rate from start, default (20.0)mm/s \nex:\nex /path/to/em.py --ds=10.0 --de=25.0 --fs=50.0 --fe=60.0 FILE.extruderfile ``` -----------------------------