Extruder Gyroscope, Print in place with press fit magnets. i3 MK3s

thingiverse

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! The magnets I used can be found here. https://www.amazon.com/gp/product/B07BK7XC5S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 The Provided G code uses a filament swap. I have provided the Blender file and the 3mf Prusa slicer file and .stl file. EDIT: I suggest using a dab of superglue to affix the magnets as the heat from the motor will eventually move through the metal and soften the PLA and cause the gyroscope to fall off. Print instructions My Gcode file has a filament swap for a color stripe. I used PLA Filamentum Neon Green and Vertigo Grey. Print in place freely spun after print finished. I hand spun it quickly for a while to get it to freely rotate and move better. EDIT: I suggest using a dab of superglue to affix the magnets as the heat from the motor will eventually move through the metal and soften the PLA and cause the gyroscope to fall off. To get the GCode and Slicer files go here. https://www.prusaprinters.org/prints/32547-extruder-gyroscope-print-in-place-with-press-fit-m This is a remix based on. https://www.prusaprinters.org/prints/2561-mk3s-spinning-gyroscope