Extruder Feeder Mount for Voxelab Aries

thingiverse

Extruder Feeder Mounting Bracket for a Voxelab Aries Printer, Rubber Mounted Bracket is for use of a Creality Upgraded MK-8 Metal Feeder Extruder. NOT FOR A DUAL GEAR FEEDER. It's mounted in two 3/8" rubber grommets to eliminate the buzzing noise. Must use the spring from the original Aries extruder. The inside diameter of the spring is smaller. I had to use an M3 cap screw in the lever to locate the spring. The Creality spring caused skipping. I used the hardened extrusion gear from the Aries also. This will need to be realigned to the Creality feeder. Use blue Loctite on the 4 screws that go into the stepper motor. You will need Qty. 5, #4 X 3/8" pan head screws for the filament sensor and the cover, Two 3/8" rubber grommets, and two #8 X 1" flathead screws. The sheet metal back cover must go on before the filament sensor cover goes on. The fitting on the top feeder is a PC4-M10 The fitting going into the mount on the bottom is a PC4-M6.