Extruder Adapter Festo

prusaprinters

<p>Small M5 to M6 Adapter to be able to use a Festo QSM-M5-4 push-in fitting instead of the original Creality Extruder plug, which couldn´t hold a tube properly. I Used a raft to print this but it might work without. I have not tested it without.</p> <p>The model is already threaded. Works perfekt for me on the "vanilla" Extruder. The tube didnt move a millimeter since i installed the Festo fitting. You can get the QSM-M5-4 i.g. on AliExpress, maybe local Hardware-Store or from work like me...</p> <h3>Print instructions</h3><h3>Category: 3D Printer Extruders Summary</h3> <p>Small M5 to M6 Adapter to be able to use a Festo QSM-M5-4 push-in fitting instead of the original Creality Extruder plug, which couldn´t hold a tube properly. I Used a raft to print this but it might work without. I have not tested it without.</p> <p>The model is already threaded. Works perfekt for me on the "vanilla" Extruder. The tube didnt move a millimeter since i installed the Festo fitting. You can get the QSM-M5-4 i.g. on AliExpress, maybe local Hardware-Store or from work like me...</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Creality</p> <p><strong>Printer:</strong> Ender 3 Pro</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.12</p> <p><strong>Infill:</strong> 100%</p> <h3><strong>Filament:</strong> any PLA/PETG How I Designed This</h3> <p>Fusion 360, Cylinder, M6, M5, 1.8mm hole, done..</p>