External PC power button

prusaprinters

General:A simple box for an external power button for your computer featuring a self-closing magnetically-hinged guard. Double-sided tape is used to prevent it from moving when pressed.Note: the hinge piece can be printed together with the body or separately for ease of replacement/repairif printing the body individually, it should be printed faced-downthe 16mm version with separate hinge and body pieces shown in picturesFasteners:2-6x m3x8mm socket-head screws6 (or 4) screws are needed if printing the body and hinge separately, with 4 used for the bottom plate (or just 2) and 2 more to attach the hinge to the bodyonly 4 (or 2) screws are needed for the bottom plate if printing the body and hinge together.Magnets:2-3x 6x2mm small round magnets use 3 magnets (just stack them) if you want more “springiness” for the snap-back of the guard, see pictures6x3mm magnets should work as wellOther Necessities:Double-sided tapeInstructions:Insert the power button into the body piece and attach firmly with nut (should have come with the button)line-up the wires with the small arch in the rear of the bodyattach bottom plate with 2-4x m3 screwsthey are screwed directly into the plastic of the bodypush-fit the magnet into the hole on the surface the body(optional) attach hinge to body if printed separately with 2x m3 screwspush-fit the magnet into the hole on the surface the guardmake sure the magnet here repels the one on the body (i.e. same polarity)if the magnet fits too loosely, super glue can be use to hold it downpush the guard onto the hinge to attachattach assembly to preferred surface with double-sided tapePrint Settings:Printer: Prusa I3 MK3SNozzle:0.4mmRafts:NoSupports: YesResolution:0.30 mmInfill: 15%Material:PLA