Extension Pole Adapter

prusaprinters

<p>I've got an aluminum extension pole and bought a window scrubber to use with it. Naturally, however, every manufacturer wants you to use <i>their</i> pole, so the attachment did not fit - the threads are far inside the handle and the pole does not fit inside.</p><p>So, I took the middle section of ricswika's Ice Scraper (https://www.thingiverse.com/thing:1303933) and modified it to make it narrow enough to fit inside the hollow attachment handle. The pole then screws into the other end of the adapter and now I can wash the windows. :-)</p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>SeeMeCNC</p><p><strong>Printer: </strong>Rostock MAX v2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>0.3</p><p><strong>Infill: </strong>20%</p><p> </p><p><strong>Notes:</strong></p><p>Print vertically to avoid supports.</p><p>There's a little funkiness in the mesh where the round section transitions to the male threads. I added a modifier in Slic3r to make that shoulder area 100% infill for strength.</p><p><strong>Category: </strong>Parts</p>