EXPRESSLRS ELRS lite module case (lilygo ttgo v2 Lora32 )

thingiverse

Found this original Version on the ExpressLRS-Hardware Github (https://github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/STL/SugarK-slim-slimmer-case) but for the DIY 2.4GHz by SugarK. But i had to modify this one to fit the ttgo_v2 module with it's display in the case AND the small voltage regulator (buck converter). so i startet chopping the original top and bottom to expand the length and shrink the width, after everything was fine, i had to do some prints until it fits as good as it can after messing with the original parts. i later startet creating the top cover in freecad by myself, so you don't have to work with the mess i've done first. For the wiring, it should be obvious how it should be connected to the header. BUT: if you would like to have the modules connected to the radio while connecting to your computer for updates or so, you HAVE TO follow the schematics i've provided. WIP!!! The cover needs a small latch, which will snap into the bottom ventilation slot or a third hole for the remaining screw. There is also no opening for the USB port, which isn't necessary after first time flashing, because the update can be done by wifi or the radio (wifi prefered).