Explorer Board Case (openAPS)
thingiverse
New Top and Bottom Case: EB_case_top_new_m.stl EB_case_bottom_new_m.stl USB opening has been slightly modified. The unnecessary power button has been removed, and interlocking extrusion has been added. The original top/bottom case cannot be mixed with the new one. The locking latch is a tight fit. You may close/open it several times before assembly to make it easy to open when everything is together. Even sanding it down or using a fine file to remove some material can help. This new case will fit a maximum of 50x45x11mm LiPo batteries. I have a 3000mAh battery (SD 104255 26000mAh) that will work. Even four AAA Alkaline batteries will fit, and I'll make a holder for four AAA if I get the time and motivation to do it. Three batteries are needed to power the EB, and the fourth is available as a spare for the MT pump. It's better to print the top_no_switch.stl, rather than the top.stl with the switch. The switch is not being used; only the JST battery connector is being used. Rotate the top case 180 degrees around the Y axis.
With this file you will be able to print Explorer Board Case (openAPS) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Explorer Board Case (openAPS).