Exo-Suit (Part 3: Gauntlets)

thingiverse

I'm adding gauntlets to my Exo-suit project, replacing the original stirrup style hands. I've included a separate Cuff so they can be worn alone without the rest of the suit. Everything except the knuckle hardware can be printed with 20% infill and 0.6mm sides. The Knuckle hardware needs to be printed at 100% infill. Print at 20mm/sec or slower, max 0.2mm layer height, and supports everywhere. I've included only one copy of each file, with the fingers being the same from left to right hand, and the thumb being the same but assembled opposite. The end pieces of the fingers can break if bent too far when assembled. Make sure the parts are clean of all supports, holes are cleaned out, and the posts are round. Test fit and verify all parts before melting or gluing the retainers down. Follow the pictures for assembly instructions. Printer Settings: Print Brand: Printrbot Print Model: Simple Black Rafts: No Rafts Supports: Yes Everywhere Resolution: 20mm/sec Infill: 20%, 100% Infill