EXIT trampoline - Net support pole end cap
prusaprinters
<p>This is a replacement end cap to go on the top of the vertical poles, supporting the top ring which holds the safety net.</p><p>Many of my original brackets snapped off after a few years so I designed this replacement as EXIT will not sell you the caps alone. See photos 4 and 5 for the failure of the original parts.</p><p>It must be printed lying on it's side so that you have maximum lateral strength. I would strongly recommend to also align the upper slot vertically so no support is needed there.<br>See the last photo for best orientation.<br>The support is a bit of a pain to get out but it is worth it to avoid the inner spike shearing off along the layer lines.</p><p>Even though it is outdoors, I print these in PLA. After a whole summer in 40C weather, there is no sign at all of degradation. This is due to them being very thick walled. You could print them in ASA etc but I have found PLA is just fine.</p><p>I designed it in TinkerCAD</p>
With this file you will be able to print EXIT trampoline - Net support pole end cap with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on EXIT trampoline - Net support pole end cap.