Evolve GTR Series 2 Magicshine SeeMee 30 Deck Light Mount

thingiverse

---------> Notes <--------- This mount was designed for the Evolve GTR Series 2 Bamboo Deck to mount the Magicshine SeeMee 30 bike (front/rear) light to the noses of the board using the (2) pre-drilled holes by evolve, no modifications are needed to the board. Mount was designed to allow higher visibility compared to when the lights mounted directly to the trucks underneath the board during day/night rides resulting in a higher probibilty of being seen by drivers. Recommended Filament is PLA+ with minimum of 40% infill, double sided foam tape can be used for vibration dampening. Zip Ties can also be used to fasten the mount to the board. Other lights of similar design can possibly be mounted to the mount as well however you will have to experiment with the design, I would assume that this mount will work with other boards as well. This is an economical options to shreadlights. Mount WAS NOT TESTED with the nose guard, and I will be designing a model that works with the bash guards once they become in stock again. Thanks & Enjoy ____________________________________________________________________________________________________________________________________________________ ---------> Hardware Notes <--------- All Hardware can be found at your Local Lowes, Home Depot, or Other Hardware Stores. A Socket Head Cap can also be used if desired, However if the (od) of the head exceeds 9.75mm (the counter-bore holes will need to be modified as well as the model). For best results use the hardware listed above. ZIP TIES can be used to fasten the mount as well if desired. ____________________________________________________________________________________________________________________________________________________ ---------> Thingiverse url <--------- https://www.thingiverse.com/swedishfishbandit/designs ____________________________________________________________________________________________________________________________________________________ ---------> Printing Information <--------- Material | PLA+ is recommended Infill | Recommend a minimum of 40% infill Print Time | 4hrs 40mins @ 30mm/s with 40% infill Supports | YES Print Orientation | Bottom to Top for best results (in my case) ____________________________________________________________________________________________________________________________________________________ ---------> Magicshine SeeMee 30 front/rear url <--------- Magicshine SEEMEE 30 Bike Lights Front and Rear | https://www.amazon.com/dp/B085L5VL4D?psc=1&ref=ppx_yo2ov_dt_b_product_details ____________________________________________________________________________________________________________________________________________________ ---------> Mounting Hardware Used <--------- (4) M5-0.8x40mm | Button Head Hex Socket | Black Oxide Coating (4) M5x10x1mm | Flat Washer | Black Oxide Coating (4) M5x0.8mm | Self Locking Nylon Nuts | Black Oxide Coating ____________________________________________________________________________________________________________________________________________________ ---------> Mounting Hardware Purchase Links <--------- M5-0.8x40mm | Button Head Hex Socket | https://www.amazon.com/gp/product/B094MWQJDN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 M5x10x1mm | Flat Washer | https://www.amazon.com/gp/product/B01NAB602N/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 M5x0.8mm | Nylon Self Locking Nuts | https://www.amazon.com/gp/product/B07MNJJQJS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ____________________________________________________________________________________________________________________________________________________