Eva 2.4 Bambu Lab hotend mount

prusaprinters

Hello thereI created this Bambu Lab hotend mount, for my 3D printer, because nobody have done this before :PI choosed this hotend, because it is very light, cheap (like for this flow), small and convenientPersonaly I bought this hotend from aliexpress, it is little bit improved, thanks this I can quicly demontage heat block with heat break without demontage all hotend with heat sickThis version of hotend has nozzle change option, not like oryginal, thanks it I can use cht nozzle or bigger size nozzleIf something happens to hotend, I don't have to buy the whole hotend, I just can buy one part to replaceLink to hotend: https://a.aliexpress.com/_EwN1fFFPARTS:In my case, I used 40x40x10 heat sick fanYou need these bolt lengths:2x 16mm M33x 25mm M3Bowden tube for Dual Gear extruder is 4mm wide and 43.5mm lengthI used Length 3mm, M3 (OD 4.5mm) inserts (https://pl.aliexpress.com/item/1005004870993068.html?spm=a2g0o.order_list.order_list_main.160.21ef1c24IPJJvy&gatewayAdapt=glo2pol)POST PROCCESINGIf you printed needed parts, it is necessary to drill all printed holes, to make sure they are correct sizesI am klipper user, and if you installed the hotend, you need ti change few parameterAt first, you need to change thermistor type in cgf file, the thermistor type is "EPCOS 100K B57560G104F", with this new hotend, you need to change max temp to 300After that, you need to make PID tuning, and next calibrate Z offset (with preheated bed and nozzle heater)Eva 2.4 project: https://2.eva-3d.page/I will be grateful for all comments and likes <3