Eureka Mignon Single Dose Base Tilt

prusaprinters

This is a tilted base for the Eureka Mignon Grinder lineup. I only have access to a Eureka Mignon Crono, so can not vouch for the other variations (e.g. Specialita etc.), but as far as I understand, they are all the same dimensions. I was not happy with the other tilted bases on Thingiverse, as they were all a bit too bulky looking for me. This base is designed to integrate seamlessly with the grinder itself and create one overall 'object'. The overall design as well as the exact tilt angle is heavily influenced by the new Eureka ORO - Mignon Single Dose grinder. The base comes in 3 pieces: The 1st piece (TiltedBaseEureka.stl) is the tilted base and can be used on its own, while the other 2 pieces (TrayEureka_1.stl + TrayEureka_2.stl) create a tray for you to put on the container in which you grind into. The tray is best only to be printed if you also print the tilted base, for it to be secure. Just put a bit of glue between the contact points of both the TiltedBaseEureka.stl and TrayEureka_1.stl for them to be combined, as by design they are both already angled to interlock somewhat in the Y direction. TrayEureka_1.stl + TrayEureka_2.stl should fit perfectly into each other in order to create 1 single piece. I designed this in 2 pieces as to enable multi material use. I printed TiltedBaseEureka.stl as well as TrayEureka_1.stl in PETG as to have less shrinking and more structural rigidity, but PLA should work just fine as well. TrayEureka_2.stl was printed in Wood PLA, as to recreate the look of the new Mignon Single Dose grinder. I designed the whole base as to have as low of a profile as possible, as I prefer that aesthetic. If you are interested in a version with a 'higher' base, let me know in the comments. Happy grinding! Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Infill: 10% Grid Filament: / PETG + Wood PLA Black + Wood Category: Kitchen & Dining