Ethix Cinerat Kit

prusaprinters

<p>The original design of the prop guards is by Tiaan Muller and his work can be found at: <a href="https://grabcad.com/library/wishbone-bumper-kit-ethix-cinerat-1">https://grabcad.com/library/wishbone-bumper-kit-ethix-cinerat-1</a> I modified some of the parts to fit the frame properly and be 3d print friendly.</p> <p>The guards have a hole towards the front for an immortal-t antenna to rest inside of.</p> <p>New gopro mount, since the original one was further back, moving it forward increases space for a larger battery.</p> <p>Developed a slimmer camera cage, for analog cameras. The original was meant for a DJI camera and if you used an analog camera, you could see the sides of the bumper in camera.</p> <p>An antenna pole so you can mount it towards the center for improved video transmission.</p> <p>Lastly I developed a new holder for the xt30 battery and balance connector. It keeps the wire safe during crashes.</p> <p>I've also included the fusion360 file for anyone to update an edit.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>railcore-ish</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>200</p></div> <p><strong>Infill:</strong></p> <p>20% Triangle</p> <p><strong>Filament:</strong></p> any TPU <p>any</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>If you print in tpu, slow and steady is the way. I recommend printing each item by itself, to reduce stringing. I recommend printing the bumper guards in a stiff TPU (98a shore), otherwise they add a lot of vibration and can bend into the props. Printing the guards with something stiffer like PLA, PTEG or Nylon works, but be prepared to reprint when they break.</p> Everything else, a soft or stiff TPU is recommended. </div></p></p> Category: R/C Vehicles