Escom Amiga 4000T Door

prusaprinters

Parts were printed on my Prusa XL with 0.4mm nozzle using PETG.Note that some of the parts will require some tweaking, as the original Escom molds had poor mechanical tolerances. In particular, the pins used on the side may be too small, depending on your bezel.The various parts of the door are expected to be printed with minor supports on some of the overhangs, and then glued together. Make sure you use fresh filament – moisture will affect how this comes out, due to the front chamfers. I recommend not gluing the pins if you can manage it, since the fit is very tight and you may need to replace them over time.Included are the SVG files used to print out a front label for the door, as well as an SVG to cut out a piece of acrylic on a laser cutter, the full window model, and all of the models in STL and STEP form.