Epoxy stand/container with a lid (for tubes 25mm and 30mm)
prusaprinters
I created two version of this container. For 25mm wide tube and for 30mm wide. The 25mm version has shorter lid, but of course for the 25mm version the taller lid could be used. The lid has four latches that hold the lid closed on the stand. In the stand there are two holes for mixing sticks. And slot for some mixing cup or epoxy manual. Print Settings Printer: Geeetech prusa clone Rafts: No Supports: No Resolution: 0.2 Infill: 25 Notes: Supports are not needed. There are custom supports provided within the model. Four in the lid (supporting the latches) and four in the stand that allow to print the slots for that latches from the lid. These supports should be easy to remove with some small prying tool. Category: Containers
With this file you will be able to print Epoxy stand/container with a lid (for tubes 25mm and 30mm) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Epoxy stand/container with a lid (for tubes 25mm and 30mm).