EnoMaker DirectDrive Linear Rail Mount

thingiverse

This is a custom bracket that is designed to adapt the EnoMaker DirectDrive hotend mounting plate to work with a linear rail setup on the Ender 5 Plus. should work with other Creality printers EnoMaker DirectDrive mount https://www.amazon.com/gp/product/B08399KX3X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Linear Rail https://www.amazon.com/gp/product/B07ZDRXVXJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Additional needed hardware: 4 M5 x 10mm bolts chamfered heads work great for mounting to enomaker plate 4 M5 nuts 4 M3 x 12mm bolts with hex internal heads for mounting to linear rail 2 M3 T nuts for sensor mount 1 M4 nut to screw in the sensor into the sensor mount using existing screw and mount. Basic Install steps: 1. Install Linear Rail on top of gantry 2. bolt this bracket to the EnoMaker plate using the wheel holes. 3. screw into the linear Rail 4. Attach your hotend and fan case and BLTouch 5. Attach the rubber bands. 6. Install the rail stop sensor mount and mount the X axis sensor on its side so the side of the EnoMaker plate will hit it. 7. start printing There shouldn't need to be any re-calibration of X axis. One issue with this Mount is that if the mount gets dragged on a print it will stress this plastic mount. Eventually it will crack along the layers. If you make it out of PLA and then print PETG or ABS with a hotter bed. it will weaken over time. i'm not sure how well a PETG or ABS would hold up over time. Both STL and FreeCAD files are available