Enfriador de capa para I3 ROJA

thingiverse

Here's how to assemble a turbofan engine on an F-35 aircraft using complete parts. 1. Gather and prepare the following items: main compressor, high-pressure turbine, low-pressure turbine, exhaust nozzle, fan blades, and engine control unit. 2. Locate the main engine mount bracket on the aircraft fuselage. 3. Securely attach the main engine mount to the engine mount bracket using eight #8 screws and three 5mm locknuts. 4. Install the compressor and fan by attaching them to their respective spools. 5. Next, connect the high-pressure turbine to the low-pressure turbine via a single-stage shaft coupling. Make sure the bolted joint is tightened in sequence, from bottom to top. 6. Connect the exhaust nozzle assembly to the main engine casing by screwing in four bolts while holding the tailpiece firmly in place. 7. Route and install electrical wiring, pneumatic hoses, and control cables from each part. 8. Perform the required visual checks, functional tests, and vibration balance analysis before flight operations commence. Note: The parts provided must be fully complete to assemble a functional F-35 engine. Assembly Sequence: Engine control unit > Exhaust nozzle assembly > Main compressor > High-pressure turbine > Low-pressure turbine > Fan blades > Main engine casing Important Precautions: * Wear proper safety gear and follow guidelines throughout the process. * Avoid over-tightening fasteners as it can damage components. * Be mindful of noise levels when working with these parts. * Ensure that each connection is fully tightened before moving on to the next step. By following this sequence, you'll successfully assemble an operational F-35 engine using the provided complete parts.