Ender3 Samsung Galaxy S5 Phone holder

thingiverse

This is a phone mount made specifically for the Samsung Galaxy S5 to mount to the Ender3 with no screws, glue or anything else. Just print, slide its into your Ender3, and add your S5, done! The phone will friction fit into the mount up to the volume buttons and stop, it will hold the phone plenty tight enough that it wont move at all, but can still be easily removed. The mount itself slides between the Ender3s LCD PCB, the metal faceplate, and the screw posts holding the screen in. It's a nice snug fit. TO INSTALL THE MOUNT: 1. The top and bottom arms should both be inserted parallel up against the Enders LCD screen edges from the back on the right side between the PCB and the metal face plate. 2. The top arm will come out the left side still parallel. 3. The bottom arm will hit the bottom left screw post, use anything pointy to persuade the bottom arm to go below the bottom left LCD screw post. (doesn't take much persuasion) 4. Make sure you push the mount all the way in. it should actually feel fairly satisfying how it just snaps in. 5. If installed correctly you should have about 9mm of the 2 arms sticking out the left side, these shouldn't interfere with anything, but can be cut off if you want. TO INSTALL THE PHONE: 1. Just slide the phone into the mount, thats it. I designed it for the phone to be upside down so the charger cable comes out the top (mostly so my kids can't pull on it). But it'll work either way. The volume buttons will stop the phone from going further. INCLUDED Fusion360 .f3d file if you would like to modify the design to fit a different phone.