Ender3 Pro/v2 Electronic Box with Raspberry Pi

prusaprinters

<p><strong>This is a remix of a model on Thingiverse if you want to see the original model see this </strong><a href="https://www.thingiverse.com/thing:4812842"><strong>link</strong></a></p><p><strong>if you need a screen mount see the design I made </strong><a href="https://www.printables.com/model/219216-ender-3-43-inch-touchscreen-mount"><strong>here</strong></a></p><h4>PRINT Settings</h4><ul><li>Turn Support on with a density of 10%</li><li>100% infill</li><li>ABS filament is recommended because PLA or even PETG might melt because of the heat generated by the mainboard and raspberry pi and the enclosed environment if your printer is in an enclosure</li></ul><h4>BOM</h4><ul><li>12 M5x8 Bolts</li><li>12 M5 T Nuts</li><li>3A Buck Converter</li><li>Fans</li><li>Screws and Nuts for your fans</li><li>Raspberry Pi</li></ul><h4>!!!CAREFUL<br>When you are done printing and removing supports, be very careful on the Mainboard side. There is a 5th screw that is buried in the support material so just be careful that you don't rip it off. Won't be the end of the world if you do, that side of the mainboard just won't be supported.</h4>