Ender Spool Clamp(18mm)

thingiverse

Remixed by reducing the height from 25mm to 18mm due to the spool adapter I'm using for my Sunlu spools. The reduction was necessary because of the [spool adapter](https://www.thingiverse.com/thing:4082858). I used Cura 4.3.0 with *concentric* infill at 50%. This seems to be the best choice considering the minor flexing of the clamp. # Print Details **Printer :** Creality Ender 3 Pro(2019 Q3) is the printer I used, equipped with BlTouch bed leveling. **Material :** Sunlu PETG was the material used, specifically white, 1.75mm, at temperatures of 235C / 75C. **Set Up :** The printer is located in an insulated enclosure and features a glass bed, 0.6 nozzle, and other specific settings. **Settings :** Resolution details include 0.34 initial layer, 0.30 layer height, and 0.60 line widths. Infill was set to 50% with concentric patterns. Temperatures were also carefully set at bed 75C and hotend 235C. Cooling was adjusted with 25% initial until 0.94mm (3 layers) and 50% remainder. Print Speed was set at 100%. Adhesion features a Brim of 10mm, outside only. **Files Included :** * `spool_clamp_18mm.stl` - remixed from [here](https://www.thingiverse.com/thing:3478552), reduced the height from 25mm to 18mm. * `spool_clamp_18mm-flat.stl` - a version with flat sides and indentations for gripping.