Ender 6 - 4020 Part Cooling Fan Duct with Magnetic Mount 11 min Benchy

prusaprinters

Later Edit:11.april.2024 i have added the step file.Please post your make and share your experience with this.https://www.paypal.me/NDRNADIR  Later Edit :I have added the Magnets holder with a cutout for the X endstop cable Introducing the Ender 6 Shroud, a specially designed part to enhance the performance and functionality of your Ender 6 3D printer. This shroud is meticulously crafted to accommodate a 3010 hotend fan and a 4020 blower fan for efficient part cooling. With added features like a mount for a BLTouch and an accelerometer for input shaper, this shroud takes your printing experience to the next level.Constructed with simplicity and convenience in mind, the Ender 6 Shroud incorporates 8 round N52 neodymium magnets (3mm x 6mm) to ensure a secure grip. Installation is a breeze - start by inserting 4 magnets on the X shape part and mount it behind the heatsink. The X  is perfectly aligned to seamlessly integrate with the 2 mounting points on the heatsink. Fasten the heatsink in place using 2 M3x16mm screws.Next, install the remaining 4 magnets on the shroud, ensuring opposite polarities to those on the X . Secure the 3010 fan using 4 M3x16mm screws and attach the part cooling fan to the shroud using 2 M3x16mm screws. If you're using a BLTouch, insert 2 heat inserts on the shroud and attach the adjustable-height BLTouch mount using 2 M3x8mm screws.Designed with compatibility in mind, the Ender 6 Shroud is suitable for use with Volcano hotends as well as normal heat blocks. Enjoy improved printing performance and show your support by sharing your successful prints. We would appreciate your feedback and likes if this product has benefited you.Bill of Materials (BOM):Ender 6 Shroud (1)3010 Hotend Fan (1)4020 Blower Fan (1)N52 Neodymium Magnets (8) - 3mm x 6mmM3x16mm Screws (6)M3x8mm Screws (2) [For BLTouch installation]Heat Inserts (2) [For BLTouch installation]Note: The BOM assumes the availability of the necessary mounting hardware, such as nuts and washers, which may vary depending on the specific printer model and personal preferences. Print Suggestion:For optimal results, we recommend the following print settings for the Ender 6 Shroud:Material: ABS or PETG (both suitable for this application)Print Orientation: Face down (shroud) and as per standard orientation for other componentsInfill: 20% (or adjust as desired)Perimeters: 3Top Layers: 5Bottom Layers: 5Supports: Yes (for the shroud)These settings have been tested and found to provide excellent results in terms of strength, durability, and overall print quality. However, feel free to adjust the settings according to your preference or specific requirements.Remember to share your successful prints and provide feedback on your experience with these suggested settings. Happy printing! Thanks to Bosco Lau  for his idea from where i got inspired to make this upgrade